Please note: Up to 10 day lead time prior to dispatch
 
215L - Unvented Stainless Steel Cylinder - Including sensor pockets
Specs.

Nominal Capacity 215L
Auxiliary Capacity 140L
Element rating 1 x 3kw
Auxiliary Coil surface area 0.75m2
Solar Coil surface area 1.1m2
Weight (full) 264kg (empty) 49kg
Heat up Time 21.5mins
Reheat Time 16mins
Diameter - 574mm
Height - 1455mm
 
Includes Immersion heater rated @ 3kw, 240volt, single phase, incoloy 825, with thermostat with independent cut-out
Thermal insulation CFCHCFC free, (ODP zero), 60mm fire retardant insulation
Outer Casing grey plastisol
Inner Cylinder Duplex 2304L stainless steel
Corrugated high performance heating coils
 
- Indirect models with two coils designed for oil, gas or electric boiler auxiliary heat input
Indirect thermostat factory fitted twin thermostat with independent reset, 30-70degC
Safety Device factory fitted 7bar90degC pressure temperature relief valve
InletOutlet
Solar Coil flow and return connections
Auxiliary coil flow and return connections
Temperature probe bosses
Secondary return
 
All cylinders are pressure tested to 10.5bar, no anode required, Beab, KIWA, WRAA, WRC and Benchmark approved 5 year guarantee available on all components except immersion heater and cylinder thermostat (which carry a 2 year guarantee)
 
Also Included:
Safety Control Valves
- Pressure reducing valve 3 bar CW check valve and strainer.
- Expansion relief valve 6 bar
- Pressure Temperature relief valve 7 bar90degC factory fitted
- 15 x 22mm Tundish with compression fittings
- Indirect model twin thermostat 30-70degC
 
Expansion Vessel - 12litre
 
Warranty: 25 Years Extendable. Requires Annual Service